Kia EV9 2023 Owner's Manual page 264

Vehicle controls
High Beam Assist setting
With the ENGINE START/STOP button in the ON position, select [[Lights → High Beam
Assist]] from the Vehicle Settings menu to turn on High Beam Assist and deselect to turn
off the function.
WARNING
For your safety, adjust your high beam settings only after parking the vehicle at a safe
location.
High Beam Assist operation
Display and control
僅 After selecting High Beam Assist in the Settings menu, High Beam Assist will operate by
following the procedure below.
- Place the headlamp switch in the AUTO position and push the headlamp lever
towards the instrument cluster. The High Beam Assist (
on the cluster and the function will be enabled.
- When the function is enabled, high beam will turn on when vehicle speed is above 30
km/h (20 mph). When vehicle speed is below 20 km/h (12 mph), high beam will not
turn on.
- The High Beam (
僅 When High Beam Assist is operating, if the headlamp lever or switch is used, the func-
tion operates as follows:
- If the headlamp lever is pulled towards you when the high beam is off, the high beam
will turn on without High Beam Assist canceled. When you let go of the headlamp
lever, High Beam Assist will turn on again.
- If you push the light switch towards the instrument cluster, high beam is turned on
and High Beam Assist is released.
- If the headlamp lever is pulled towards you when the high beam is on by High Beam
Assist, low beam will be on and the function will turn off.
- If the headlamp switch is placed from AUTO to another position (headlamp/position/
off), High Beam Assist will turn off and the corresponding lamp will turn on.
僅 When High Beam Assist is operating, high beam switches to low beam if any of the fol-
lowing conditions occur:
- When the headlamp of an oncoming vehicle is detected.
- When the taillamp of a vehicle in front is detected.
- When the headlamp or taillamp of a motorcycle or a bicycle is detected.
- When the surrounding ambient light is bright enough that high beams are not
required.
5 100
) indicator light will appear on the cluster when high beam is on.
1 Lights
2 High Beam Assist
) indicator light will appear
Adjusting