Kia EV9 2023 Owner's Manual page 467

Driver assistance guide
If the accelerator pedal is depressed, the white (
WARNING
The warning message will appear in the following circumstances:
Warning message: Drive Carefully
僅 Navigation-based Smart Cruise Control is not able to slow down your vehicle to a safe
speed
NOTE
僅 Highway Curve Zone Auto Slowdown and Highway Set Speed Auto Change function
uses the same (
僅 The images and colors in the instrument cluster may differ depending on the cluster
type or theme selected from the settings menu.
Highway Curve Zone Auto Slowdown
僅 Depending on the curve ahead on the highway (or motorway), the vehicle will deceler-
ate, and after passing the curve, the vehicle will accelerate to Smart Cruise Control set
speed.
僅 Vehicle deceleration time may differ depending on the vehicle speed and the degree of
the curve on the road. The higher the driving speed, deceleration will start faster.
Highway Set Speed Auto Change
僅 Highway Set Speed Auto Change function will operate when Smart Cruise Control set
speed and the highway (or motorway) speed limit is matched.
僅 Whilst Highway Set Speed Auto Change function is operating, when the highway (or
motorway), speed limit changes, Smart Cruise Control set speed automatically changes
to the changed speed limit.
僅 If Highway Set Speed Auto Change function has changed to the standby state by driving
on a road other than the highway (or motorway) main road, Highway Set Speed Auto
Change function will operate again when you drive on the main road again without set-
ting the set speed.
僅 If Highway Set Speed Auto Change function has changed to the standby state by
depressing the brake pedal or pressing the ( ) switch on the steering wheel, press the
( ) switch to restart the function.
NOTE
僅 If Smart Cruise Control set speed is adjusted different from the speed limit, Highway Set
Speed Auto Change function will be in the standby state.
僅 Highway Set Speed Auto Change function only operates based on the speed limits of
the highway (or motorway). It does not work with the speed cameras.
僅 Highway Set Speed Auto Change function does not operate on highway interchanges or
junctions.
僅 When Highway Set Speed Auto Change function is operating, the vehicle automatically
accelerates or decelerates when the highway (or motorway) speed limit changes.
僅 If the speed limit is higher than the speed limit of the speed camera, the audible warning
may sound.
僅 The maximum set speed for Highway Set Speed Auto Change function is 140 km/h (90
mph).
) symbol.
Navigation-based Smart Cruise Control (NSCC)
) symbol will appear on the cluster.
7 85