Kia EV9 2023 Owner's Manual page 186

Vehicle controls
Enrolling fingerprint
OMV033009
1 Fingerprint sensor
1. Turn on the vehicle.
2. Select [[Setup → User Profile Settings → Driver 1 → Fingerprint Identification →
Set/Delete Fingerprint → Set]] in the infotainment system screen.
3.Place your finger that you wish to enroll on the fingerprint sensor (A) according to the
instruction.
4.Following the instructions, place several parts of your fingerprint until the scanning pro-
cess is complete.
5.Once the scanning process is completed, the message Saving fingerprint.... appears
and the fingerprint enrollment process is proceeded.
6.When the fingerprint enrollment process is completed in the vehicle, the status is dis-
played on the infotainment system.
TIP
The infotainment system may change after software updates. For more information, refer
to the manual provided in the infotainment system and the quick reference guide.
Deleting fingerprint
1. Select [[Setup → User Profile Settings → Driver 1 → Fingerprint Identification →
Set/Delete Fingerprint → Delete]] in the infotainment system screen.
2. Delete the enrolled fingerprint according to the message Delete all Driver 1 finger-
prints?
3.Once the fingerprint is deleted, the status is displayed on the infotainment system
screen.
NOTE
僅 If no fingerprint is enrolled in the infotainment system, the sensor will not operate.
僅 The maximum of two fingerprint can be enrolled. Driver 1 and Driver 2 can enroll one
fingerprint each.
僅 Please remove all substances including protection film on the fingerprint sensor and
enroll your fingerprint.
僅 The fingerprint enrollment process is canceled when the following condition occurs:
- The infotainment system screen is altered.
5 22
Opening and closing