Disposal - Danfoss VLT AQUA Drive FC 202 Operating Manual

Operating Guide | VLT® AQUA Drive FC 202
The specific approvals and certification for the enclosed drive are on the nameplate of the drive. For more information, contact the
local Danfoss office or partner.
Themal memory retention requirement
This enclosed drive complies with UL 508C and UL 61800-5-1 thermal memory retention requirements. The enclosed drive is UL listed
per UL508A and CSA 14 standards. For more information on UL 508C thermal memory retention requirements, refer to the Motor
Thermal Protection section in the product-specific design guide.
OUTPUT FREQUENCY LIMIT
Due to export control regulations, the output frequency of the drive is limited to 590 Hz. For demands exceeding 590 Hz,
contact Danfoss.
ADN-compliance
For more information on compliance with the European Agreement concerning International Carriage of Dangerous Goods by Inland
Waterways (ADN), refer to section ADN-compliant Installation in the product-specific design guide.

1.5 Disposal

Do not dispose of equipment containing electrical components together with domestic waste. Collect it separately in accordance with
applicable local regulations.
Danfoss A/S © 2018.10
N O T I C E
Introduction
AQ262141056213en-000101 / 130R0882 | 9