Lifting The Drive - Danfoss VLT AQUA Drive FC 202 Operating Manual
110-800 kw, enclosures d9h-d10h and e5h-e6h
Hide thumbs
Also See for VLT AQUA Drive FC 202:
- Installation manual ,
- Programming manual (770 pages) ,
- Design manual (228 pages)
Table of Contents
Advertisement
Operating Guide | VLT® AQUA Drive FC 202
4.9 Lifting the Drive
HEAVY WEIGHT
The weight of the drive is heavy. Failure to follow local safety regulations for lifting heavy weights may cause death, personal
injury, or property damage.
Ensure that the lifting equipment is in proper working condition.
-
Check the weight of the drive and verify that the lifting equipment can safely lift the weight.
-
Ensure that the angle from the top of the drive to the lifting cable is 65° or greater.
-
Test lift the drive approximately 610 mm (24 in) to verify the proper center of gravity lift point. Reposition the lifting point if
-
the unit is not level.
Never walk under suspended loads.
-
>60
>60
Illustration 13:
Recommended Lifting Method
36 | Danfoss A/S © 2018.10
W A R N I N G
Mechanical Installation
AQ262141056213en-000101 / 130R0882
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the VLT AQUA Drive FC 202 and is the answer not in the manual?