Commissioning; Safety Instructions For Commissioning - Siemens SINAMICS SH150 Operating Instructions & Installation Instructions

Commissioning

7.1 Commissioning
Detailed information on commissioning and operating the device is provided in the
Commissioning Manual that addresses commissioning engineers.
7.2

Safety instructions for commissioning

When carrying out any work, carefully observe the information provided in Chapter "Safety
instructions (Page 13)".
Material damage caused by transport indicators that have become loose
In operation, as a result of high temperatures, the transport indicators can become detached
and fall into the device. Material or temperature damage may result.
● Remove the transport indicators before commissioning. Remove any adhesive residue from
Danger to life as a result of incorrect commissioning
Malfunctions can occur as a result of incorrect commissioning or incorrect parameterization.
Premature failures and subsequent damage to the drive system can result in death, serious
injury or material damage. Incorrectly performed commissioning can result in the warranty
becoming null and void.
● Never commission the device if it is dirty or polluted. Immediately contact Customer Support
● This device may only be commissioned by electrically skilled persons who have been
● Obtain information about the range of SITRAIN training courses available through your local
SINAMICS SH150 6SL3805
Operating Instructions 05/2020
the transport indicators using methylated spirits.
if it is polluted. You can find the relevant contact person under "Service & Support
(Page 119)".
adequately trained on this product, and have experience with commissioning this product
and the associated plant and system components. The electrical technician commissioning
the equipment must be trained on the specific product as a result of the differences between
the individual products, e.g. regarding topology and closed-loop control.
contact person. Make use of the support and services offered by the responsible Siemens
Service Center when commissioning this equipment. You can find the relevant contact
person under "Service & Support (Page 119)".
7
79