NetApp ASA C Series Install page 8

Step 4: Cable to host network or storage (Optional)
You have configuration-dependent optional cabling to the Fibre Channel or iSCSI host networks or direct-
attached storage. This cabling is not exclusive; you can have cabling to a host network and storage.
NetApp Hardware Universe
2. However, if you have both cards, the Fibre Channel card goes in slot 2 and the 25GbE card
goes in slot 1 (as shown in the options below). If you have an external shelf, the storage card
goes in slot 1, the only supported slot for shelves.
6
slot priority for host network cards (Fibre Channel or 25GbE) is slot