NetApp ASA C Series Install page 229

a. Enter the onboard security key-manager sync command:
sync
Enter the customer's 32 character, alphanumeric onboard key management passphrase at the
prompt. If the passphrase cannot be provided, contact NetApp Support.
mysupport.netapp.com
b. Verify the
Restored
key query
c. Verify that the
Key Manager
information.
d. Go to advanced privilege mode and enter
e. Enter the command to display the key management backup information:
manager onboard show-backup
f. Copy the contents of the backup information to a separate file or your log file. You'll need it in
disaster scenarios where you might need to manually recover OKM.
g. Return to admin mode:
h. You can safely shut down the controller.
= Shut down the controller - ASA C800
:icons: font
:relative_path: ./asa-c-800/
:imagesdir: /tmp/d20231020-12297-25s5m0/source/./asa-c-250/../media/
After completing the NVE or NSE tasks, you need to complete the shutdown of the
impaired controller. Shut down or take over the impaired controller using the
appropriate procedure for your configuration.
== Option 1: Most systems
After completing the NVE or NSE tasks, you need to complete the shutdown of the impaired controller.
Steps
a. Take the impaired controller to the LOADER prompt:
If the impaired controller
displays...
The LOADER prompt
Waiting for giveback...
column shows for all authentication keys:
yes
type shows onboard, and then manually back up the OKM
when prompted to continue:
y
set -priv admin
Then...
Go to Remove controller module.
Press Ctrl-C, and then respond
security key-manager onboard
security key-manager
set -priv advanced
security key-
when prompted.
y
227