NetApp ASA C Series Install page 5

Type of cable... Part number and length
RJ-45 (order Not applicable
dependent)
Fibre Channel X66250-2 (112-00342) 2m;
X66250-5 (112-00344) 5m;
X66250-15 (112-00346) 15m;
X66250-30 (112-00347) 30m
Micro-USB Not applicable
console cable
Power cables Not applicable
6. Review the ONTAP Configuration Guide
Step 2: Install the hardware
You need to install your system in a 4-post rack or NetApp system cabinet, as applicable.
Steps
1. Install the rail kits, as needed.
2. Install and secure your system using the instructions included with the rail kit.
You need to be aware of the safety concerns associated with the weight of the system.
3. Identify and manage cables because this system does not have a cable management device.
4. Place the bezel on the front of the system.
Step 3: Cable controllers to cluster
Cable the controllers to a cluster by using the two-node switchless cluster method or by using the cluster
interconnect network method.
Connector type For...
and collect the required information listed in that guide.
Management network (BMC and
wrench port) and Ethernet data
(e0a and e0b)
Console connection during
software setup
Powering up the system
3