NetApp ASA C Series Install page 3

All SAN Array (ASA) C-series Systems
ASA C250 systems
Install and setup
Start here: Choose your installation and setup experience
For most configurations, you can choose from different content formats.
• Quick steps
A printable PDF of step-by-step instructions with live links to additional content.
• Video steps
Video step-by-step instructions.
• Detailed steps
Online step-by-step instructions with live links to additional content.
If your system is in a MetroCluster IP configuration, see the
Quick steps - ASA C250
This section gives graphic instructions for a typical installation of your system from
racking and cabling, through initial system bring-up. Use this guide if you are familiar with
installing NetApp systems.
Access the Installation and Setup Instructions PDF poster:
• English: ASA A250 Installation and Setup Instructions
• Japanese: ASA A250 Systems Installation and Setup Instructions
• Chinese: ASA A250 Systems Installation and Setup Instructions
Videos - ASA C250
The following video shows how to install and cable your new system.
Animation - Installation and Setup of an AFF A250
The ASA C250 uses the same installation procedure as the AFF A250 system.
Detailed steps - ASA C250
This section gives detailed step-by-step instructions for installing an ASA C250 system.
Install MetroCluster IP Configuration instructions.
1