NetApp ASA C Series Install page 116

b. Verify the
Restored
key query
c. Verify that the
information.
d. Go to advanced privilege mode and enter
e. Enter the command to display the key management backup information:
manager onboard show-backup
f. Copy the contents of the backup information to a separate file or your log file. You'll need it in
disaster scenarios where you might need to manually recover OKM.
g. Return to admin mode:
h. You can safely shut down the controller.
= Shut down the impaired controller - ASA C400
:icons: font
:relative_path: ./asa-c-400/
:imagesdir: /tmp/d20231020-12297-25s5m0/source/./asa-c-250/../media/
After completing the NVE or NSE tasks, you need to complete the shutdown of the
impaired controller. Shut down or take over the impaired controller using the
appropriate procedure for your configuration.
== Option 1: Most configurations
After completing the NVE or NSE tasks, you need to complete the shutdown of the impaired controller.
Steps
a. Take the impaired controller to the LOADER prompt:
If the impaired controller
displays...
The LOADER prompt
Waiting for giveback...
System prompt or password
prompt (enter system password)
b. From the LOADER prompt, enter:
output to your log file.
This command may not work if the boot device is corrupted or non-functional.
114
column shows yes
type shows onboard, and then manually back up the OKM
Key Manager
set -priv admin
Then...
Go to Remove controller module.
Press Ctrl-C, and then respond
Take over or halt the impaired controller from the healthy
controller:
impaired_node_name
When the impaired controller shows Waiting for giveback..., press
Ctrl-C, and then respond y.
printenv
for all authentication keys:
when prompted to continue:
y
when prompted.
y
storage failover takeover -ofnode
to capture all boot environmental variables. Save the
security key-manager
set -priv advanced
security key-