Cc-Link Ie Tsn Class Setting Function - Mitsubishi Electric CC-Link IE TSN User Manual

CC-Link IE TSN Class setting function

This function sets the CC-Link IE TSN Class of the NZ2GN-GFB as CC-Link IE TSN Class A or B of CC-Link IE TSN Protocol
version 2.0.
For differences between system configurations that can be connected depending on the CC-Link IE TSN Class, refer to the
following.
 User's manual for the CC-Link IE TSN master station used
When the NZ2GN-GFB is used as a CC-Link IE TSN Class A device
When the NZ2GN-GFB is used with the following system configuration, set the CC-Link IE TSN Class setting of the NZ2GN-
GFB to A.
■When connecting the NZ2GN-GFB through a switching hub
Class B
Class B
Class A: CC-Link IE TSN Class A device
Class B: CC-Link IE TSN Class B device
(1) Set the CC-Link IE TSN Class to A.
■When the NZ2GN-GFB is connected after a CC-Link IE TSN Class A remote station
Class A
Class B
Class A: CC-Link IE TSN Class A device
Class B: CC-Link IE TSN Class B device
(1) Set the CC-Link IE TSN Class to A.
(1)
NZ2GN-GFB
Class A
(1)
NZ2GN-GFB
Class A Class A
7
7 FUNCTIONS
93
7.4 Others