Mitsubishi Electric CC-Link IE TSN User Manual page 129

■Network map
A network map is displayed according to the connection status.
(4)
(1)
(2)
(3)
(1) Displays the station (own station) where the engineering tool is connected.
(2) Displays the station type and station number. "?" is displayed when a station number has not been set.
When the background of the text if colored, the relevant station may have been set as a reserved station or an error invalid station. Click the [Legend] button
to check the meaning of the background colors.
(3) Module status is displayed. Click the [Legend] button to check the meaning of the icon.
When the "Error (Illegal ring connection detected/Execute loopback)" icon is displayed, take actions displayed in "Troubleshooting" of "Error details". (
Page 128 Selected Station Communication Status Monitor)
(4) A port to which an Ethernet cable is connected is displayed. (The NZ2GN-GFB is fixed to P1.)
System configuration
■Line topology
No.0
No.1
■Star topology
No.0
No.1
■Mixture of line topology and star topology
No.0
No.3
In the following cases, the network map that is different from the actual system configuration is displayed.
System configuration
Two stations are connected through a switching hub.
No.0
Switching hubs are in cascade connection.
No.0
No.1 No.2
No.2
No.2
No.1 No.2
No.3
No.3
• Click: Selection
• Right-click: Executes tests or debugging.
•     keys on the keyboard: Move the focus to the
module to be diagnosed, and determine it with the  key.
Display of the network map
Display of the network map
Branches are not displayed in the network map.
Only one branch is displayed.
10.1 CC-Link IE TSN/CC-Link IE Field Diagnostics
10 TROUBLESHOOTING
127
10