Mitsubishi Electric CC-Link IE TSN User Manual page 108

Program example (1)
The following program is for communicating between the CPU module of CC-Link IE TSN master station and the NZ2GN-
GFB.
■Devices to be used
Device
SB49
SW0B0.0
M0
N0
W107.0
W118.0
M1
N1
D0
W220
W120
D1000
W118.1
M2
N2
D16
W230
W130
D1016
SM400
■Program
(8) Communication program with remote device station (station No.1) of CC-Link IE Field Network
(22) Communication program with intelligent device station (station No.2) of CC-Link IE Field Network
8 PROGRAMMING
106
8.2 Program Examples
Description
Own station data link error status of CC-Link IE TSN master station
Data link status of each station on CC-Link IE TSN (station No.1 (NZ2GN-GFB))
Communication ready flag (CC-Link IE TSN station No.1)
Nesting (CC-Link IE TSN station No.1)
Own station data link error status of CC-Link IE Field Network master station (NZ2GN-GFB)
Data link status of each station on CC-Link IE Field Network (station No.1)
Communication ready flag (CC-Link IE Field Network station No.1)
Nesting (CC-Link IE Field Network station No.1)
Start device of data that is sent to CC-Link IE Field Network station No.1
Device to which RWw0 of CC-Link IE Field Network station No.1 is assigned
Device to which RWr0 of CC-Link IE Field Network station No.1 is assigned
Start device of data that is received from CC-Link IE Field Network station No.1
Data link status of each station on CC-Link IE Field Network (station No.2)
Communication ready flag (CC-Link IE Field Network station No.2)
Nesting (CC-Link IE Field Network station No.2)
Start device of data that is sent to CC-Link IE Field Network station No.2
Device to which RWw0 of CC-Link IE Field Network station No.2 is assigned
Device to which RWr0 of CC-Link IE Field Network station No.2 is assigned
Start device of data that is received from CC-Link IE Field Network station No.2
Always ON