Mitsubishi Electric CC-Link IE TSN User Manual page 192

Field network bridge module
Table of Contents

Advertisement

Parameter area
This area is used to perform the parameter read or the parameter write with the program.
The parameters can also be set from the parameter setting window of the engineering tool.
The parameter data set by these methods is written to this area of the remote buffer memory.
Parameter data is not enabled simply by having it written to the parameter area. To enable the parameter
data, the two following operations are required.
• Turn on the 'Operation condition setting request flag' (RWw0.b9).
• Power off and on the NZ2GN-GFB or reset it.
The parameter data is written to the non-volatile memory when the 'Operation condition setting request flag'
(RWw0.b9) is turned on. The parameter in the non-volatile memory is reflected when the NZ2GN-GFB is
restarted, so power off and on the NZ2GN-GFB or reset it.
■Basic settings (CC-Link IE TSN)
: Applicable, : Not applicable
Address
0000H
0001H
0002H to 0007H
■Basic settings (CC-Link IE Field Network)
: Applicable, : Not applicable
Address
0008H
0009H
000AH
000BH to 000FH
0010H
0011H
0012H
0013H
0014H
0015H to 0017H
0018H
0019H
001AH
001BH
001CH
001DH to 001FH
0108H
0109H
010AH
010BH
010CH
010DH to 0117H
*1 When the NZ2GN-GFB is used as the CC-Link IE Field Network master station, the parameters are reflected for the system operation.
APPX
190
Appendix 3 Remote Buffer Memory
Name
CC-Link IE TSN network No.
CC-Link IE TSN station No.
Use prohibited
Name
CC-Link IE Field Network station type
CC-Link IE Field Network Network No.
*1
Total number of device stations
Use prohibited
CC-Link IE Field Network device station
*1
setting 1st station
Use prohibited
CC-Link IE Field Network device station
*1
setting 2nd station
Use prohibited
CC-Link IE Field Network device station
*1
setting 32nd station
Use prohibited
Station No.
Station type
RX/RY points
RWw/RWr points
Reserved/Error invalid station
Station No.
Station type
RX/RY points
RWw/RWr points
Reserved/Error invalid station
Station No.
Station type
RX/RY points
RWw/RWr points
Reserved/Error invalid station
Read
Write
Read
Write

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cc-link ie

Table of Contents