Remote I/O Signal Details - Mitsubishi Electric CC-Link IE TSN User Manual

Remote I/O signal details

This section describes details of I/O signals for the NZ2GN-GFB.
If an error occurs in the NZ2GN-GFB, the remote I/O signals may be retained or cleared.
For details, refer to the following.
Page 73 I/O maintenance settings
Remote input signals received from CC-Link IE Field Network (RX0 onwards)
■When the NZ2GN-GFB is used as the CC-Link IE Field Network master station
Remote input signal (RX) is the area that stores remote input signals received from CC-Link IE Field Network device stations.
( Page 68 Communications using RX, RY, RWr, and RWw)
Device No.
RX0
RX1

RX
(1)
RX( + 1)
(1)
RX( + 2)
(1)

RX
(2)

RX( + 1)
(m-1)
RX( + 2)
(m-1)

RX
(m)
m: The "Total number of device stations" set in the module parameter of the NZ2GN-GFB. ( Page 47 Module Parameter Setting)
 : The value obtained after deducting 1 from the "RX/RY points" of CC-Link IE Field Network device stations (1st station).
(1)
 : The value obtained after deducting 1 from the total number of "RX/RY points" of CC-Link IE Field Network device stations (1st and 2nd stations).
(2)
 :The value obtained after deducting 1 from the total number of "RX/RY points" of CC-Link IE Field Network device stations (1st to (m-1)-th station).
(m-1)
 : The value obtained after deducting 1 from the total number of "RX/RY points" of CC-Link IE Field Network device stations (1st to m-th station).
(m)
Ex.
When the "RX/RY points" is set to 16 points for the first CC-Link IE Field Network device station and 32 points for the second
in the module parameter of the NZ2GN-GFB
CC-Link IE Field Network device station
1st station
2nd station
■When the NZ2GN-GFB is used as the CC-Link IE Field Network local station
Remote input signal (RX) is the area that stores remote input signals received from the CC-Link IE Field Network master
station. ( Page 68 Communications using RX, RY, RWr, and RWw)
The points set for "RX/RY Setting" in the NZ2GN-GFB under the network configuration settings of the CC-Link IE Field
Network master station are assigned. ( Page 45 Parameter Settings for CC-Link IE Field Network)
Description
Remote input signals received from CC-Link IE Field Network device stations (1st station)
Remote input signals received from CC-Link IE Field Network device stations (2nd station)
Remote input signals received from CC-Link IE Field Network device stations (m-th station)
Device No.
RX0
RX1

RXF
RX10
RX11

RX2F
APPX
Appendix 1 Remote I/O Signals
A
171