Mitsubishi Electric CC-Link IE TSN User Manual page 60

4.
Set the network parameters.
For details on the network parameters, refer to the following.
 User's manual for the master station used
Select the "Parameter Automatic Setting" checkbox of the network parameters.
When the settings of the parameter automatic setting are not configured yet, the font of the [Detail Setting]
button is blue.
5.
Double-click [Detail Setting] beside the "Parameter Automatic Setting" checkbox to display the "Parameter of Device
Station" window.
When the "Parameter of Device station" window appears, the "Station-specific mode setting" window to
confirm the settings appears.
If it is not the CC-Link IE Field Network station type that you want to set in the NZ2GN-GFB, stop the process
and look at "Station-specific mode setting" again.
6.
Set "Parameter auto-setting" in "Method Selection".
6 PARAMETER SETTINGS
58
6.3 Module Parameter Setting