Mitsubishi Electric CC-Link IE TSN User Manual page 110

(0) Specifies the setting data (CC-Link IE Field Network remote device station (station No.1)) to be used by dedicated instructions.
(70) Reads the handshake flag by turning on M1.
(133) Writes the setting data after instruction specification.
(172) Updates the handshake flag. (idle  send request)
(223) Reads the handshake flag and turns on M6 if the flag is Reception request or Transmission completed with an error.
(282) Reads the completion status and turns on M7 if the status is Completed successfully.
(329) Transfers read data.
(362) Updates the handshake flag. If M9 is on, execution is completed.
8 PROGRAMMING
108
8.2 Program Examples