Applicable Systems - Mitsubishi Electric CC-Link IE TSN User Manual

4.3

Applicable Systems

Applicable master station
When using the NZ2GN-GFB, use the following products as a master station.
■CC-Link IE TSN
Use the following products as a master station for CC-Link IE TSN.
Model Name
RJ71GN11-T2
RD78G64, RD78G32, RD78G16, RD78G8, RD78G4
RD78GHV, RD78GHW
■CC-Link IE Field Network
When the NZ2GN-GFB is used as the CC-Link IE Field Network local station, use the following products as the CC-Link IE
Field Network master station.
Model Name
R120ENCPU, R32ENCPU, R16ENCPU, R08ENCPU, R04ENCPU
RJ71GF11-T2
RJ71EN71
RD77GF32, RD77GF16, RD77GF8, RD77GF4
QJ71GF11-T2
LJ71GF11-T2
*1 If the first 5 digits of the serial No. is lower than "16012", refer to the following.
Page 280 Connecting with modules of the MELSEC-Q/L series
The above information of "applicable master station" is information at the time of this manual's issuance.
For the latest information, refer to the CC-Link Partner Association website.
www.cc-link.org
Compatible software version
For the compatible software version, always keep the engineering tool of the master station up to date.
GX Works3 is a compatible engineering tool.
When the latest software is necessary, please consult your local Mitsubishi representative.
Applicable software package
GX Works3 is needed for setting parameters and performing diagnostics in the NZ2GN-GFB.
Software
GX Works3
4 SYSTEM CONFIGURATION
24
4.3 Applicable Systems
Firmware version
No restriction
"05" or later
First 5 digits of the serial No.
No restriction
The first 5 digits of the serial No. is "16012" or higher.
Software version
Version 1.095Z or later
*1