Mitsubishi Electric CC-Link IE TSN User Manual page 200

Field network bridge module
Table of Contents

Advertisement

Link special register (SW) area of CC-Link IE Field Network
The various factors that occur when CC-Link IE Field Network is in operation are retained as word information.
In the NZ2GN-GFB, this information can be checked in the remote buffer memory using the program.
• This area contains information related to CC-Link IE Field Network. For the CC-Link IE TSN status, refer to
the user's manual for the CC-Link IE TSN master station used.
• Do not turn on or off the use prohibited area or the read-only area. Doing so may cause the system to
malfunction.
: Applicable, : Not applicable
Address
3000H
3001H to 3008H
3009H to 300FH
3010H to 3017H
3018H to 303FH
3040H
3041H
3042H
3043H
3044H to 3046H
3047H
3048H
3049H
304AH
304BH to 304FH
3050H
3051H
3052H
3053H
3054H
3055H
3056H
3057H
3058H
3059H
305AH
305BH
305CH to 305FH
3060H
3061H
3062H
3063H
3064H
3065H
3066H to 3067H
3068H
3069H
306AH to 306CH
306DH
306EH
306FH to 3073H
APPX
198
Appendix 3 Remote Buffer Memory
Name
Link startup/stop direction
Link startup/stop station specification
Use prohibited
Reserved station function disable/temp error invalid station setting
Use prohibited
Network number
Use prohibited
Station number
Mode status of own station
Use prohibited
Baton pass status of own station
Cause of baton pass interruption
Cause of data link stop
Data link stop request station
Use prohibited
Link startup result of own station
Link stop result of own station
System link startup result
System link stop result
Temporary error invalid station setting result
Temporary error invalid station setting cancel result
Result of reserved station function disable request
Result of reserved station function enable request
Setting value of total slave stations
Present value of total slave stations
Maximum baton pass station number
Maximum data link station number
Use prohibited
Maximum link scan time
Minimum link scan time
Current link scan time
Constant link scan time setting value
Connection status of own station
Use prohibited
Actual link scan time
PORT receive error occurrence rate of own station (max.)
PORT receive error occurrence rate of own station (present)
Use prohibited
Master operating station number
Submaster operating station number
Use prohibited
Read
Write

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cc-link ie

Table of Contents