Mitsubishi Electric CC-Link IE TSN User Manual page 89

When the networks consist of MELSEC iQ-R series and other series
If the system configuration without the NZ2GN-GFB consists of other components than MELSEC iQ-R series, data
communication can be performed with the following networks other than MELSEC iQ-R series by setting the communication
path.
• CC-Link IE Field Network
■Setting method
Set the following module parameters of the NZ2GN-GFB. ( Page 47 Module Parameter Setting)
Item
Application settings Valid number of routing setting
(common)
Routing setting No.1 to 16
For stations that require this setting, refer to the following.
 MELSEC iQ-R Programmable Controller CPU Module User's Manual
Communication test
This test checks if transient transmission data can be properly routed from the own station to the communication target.
For details, refer to the user's manual for the CC-Link IE TSN master station used.
Relay station network No.
Relay station No.
Target station network No.
Description
1 or greater (number of modules with
routing setting enabled)
Relay station network number
Relay station number
Target station network number
7 FUNCTIONS
7.2 Transient Transmission
7
87