Projector Feet - Christie CineLife+ CP4415-RGB Service Manual

CP4420-RGB shown
3. Lower the cover from the projector and slide it out.
4. Replace the bottom cover, if required.
5. To re-install, follow these steps in reverse order.

Projector feet

The adjustable feet can be raised or lowered when positioning the projector to make sure it is level on
all sides so the displayed image appears rectangular without any keystone.
1. Make sure the projector is in a secure position.
Christie does not recommend having the projector overhang the supporting surface when
replacing the feet, unless the projector is securely positioned.
2. Loosen the lock nut on the affected foot.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Projector covers and feet
49