8. Remove the lens mount from the projector head and carefully set it aside.
9. To re-install, follow these steps in reverse order.
Make sure the springs are kept on the mounting screws when installing.
The new lens mount includes three post screws that set the required distance of the lens mount
from the projector head. To avoid damaging the lens mount, do not adjust the post screws.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Lens mount components
53