Christie CineLife+ CP4415-RGB Service Manual page 112

9. Remove the connector-side plate of the laser driver cage by first removing the twelve screws
and .
10. On the other side of the laser driver cage, remove the pair of screws securing the board to be
removed.
11. Wearing an anti-static wrist strap, remove and replace the laser driver board.
12. To re-install, follow these steps in reverse order.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Printed circuit boards and sensors
112