Christie CineLife+ CP4415-RGB Service Manual page 50

3. Unscrew the foot until it is no longer engaged in the baseplate.
4. Replace the foot.
5. To re-install, follow these steps in reverse order.
Make sure the lock nut on the projector foot is torqued to 30 in-lb.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Projector covers and feet
50