Tools required for service
Before servicing the projector, ensure the following tools and components are available:
The projector toolbox is located inside the service compartment. On the left side of the projector, use the
high security key to open the service access door and obtain the available tools.
•
High security key
•
Long and stubby neck ball drivers—2.5 mm, 3 mm, and 5 mm (provided in the projector
toolbox)
•
#2 Phillips screwdriver
•
2 mm and 6 mm hex drivers
•
8 mm deep socket nut driver
•
13 mm wrench or adjustable wrench (open jaw)
•
Flat-head screwdriver
•
Torque driver
•
Needle nose pliers
•
Magnetizer
•
Side cutters and cable ties
•
Electrostatic protective strap and pad
•
Disposable lint-free gloves (included with optical components)
•
Cloth wipes
Index of parts and modules
The following table lists the parts and modules for CP4415-RGB, CP4420-RGB, CP4425-RGB, and
CP4435-RGB.
Description
Covers
Front cover
Rear cover
Top cover with filter access door
Bottom cover
Left cover (electronics-side)
Right cover (side-intake)
Lens mount
Motor lens mount assembly
Manual lens mount assembly
Zoom motor kit for Series II
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Parts and module replacement
Part Number
003-107374-XX
003-107371-XX
003-109695-XX
003-107335-XX
003-109441-XX
003-107373-XX
003-003903-XX
003-102333-XX
003-103912-XX
41