Coolant Pump Module For Cp4425-Rgb And Cp4435-Rgb - Christie CineLife+ CP4415-RGB Service Manual

4. Loosen the two screws to release the pump.
5. Remove the coolant pump module.
6. Replace the pump module.
7. To re-install, follow these steps in reverse order.
Christie recommends fully securing the pump module before starting to reroute and connect
the hoses.
To avoid damage when re-routing the hoses, take care not to kink the hoses.
Coolant pump module for CP4425-RGB and
CP4435-RGB
Learn how to remove the coolant pump module from CP4425-RGB and CP4435-RGB projectors.
1. Remove the front cover (on page 47).
2. Remove the top cover (on page 44).
3. To remove the light engine security cover, loosen the screw.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
75