8. Loosen the eight screws securing the radiator.
Leave one of the top screws for last to prevent the radiator from falling.
9. Remove the fans from the radiator, then remove the radiator from the bracket.
10. Replace the radiator.
11. To re-install, follow these steps in reverse order.
Radiator for CP4425-RGB and CP4435-RGB
The radiator provides the system cooling to the liquid in the liquid cooling module.
1. Remove the rear cover (on page 45).
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
69