Christie CP4445-RGB Installation And Setup Manual
  1. Manuals
  2. Brands
  3. Christie Manuals
  4. Projector
  5. CP4445-RGB
  6. Installation and setup manual

Christie CP4445-RGB Installation And Setup Manual

Hide thumbs Also See for CP4445-RGB:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation and Setup Guide
020-103746-01
CP4445-RGB and CP4455-
RGB

Advertisement

Table of Contents
loading

Related Manuals for Christie CP4445-RGB

Summary of Contents for Christie CP4445-RGB

  • Page 1 Installation and Setup Guide 020-103746-01 CP4445-RGB and CP4455-...
  • Page 2 Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose.

  • Page 3: Table Of Contents

    Connecting the chiller communication cable....... . 37 CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 4 Maintaining the chiller..........44 System operation for CP4445-RGB and CP4455-RGB projectors..... . 45 Turning on or off the projector.
  • Page 5 Environmental........... . 91 CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 6: Introduction

    For complete product documentation and technical support, go to www.christiedigital.com. Product documentation For installation, setup, and user information, see the product documentation available on the Christie Digital Systems USA Inc. website. Read all instructions before using or servicing this product.

  • Page 7: Safety Precautions

    Introduction Safety precautions Learn about the safety precautions related to the Christie CP4445-RGB and CP4455-RGB projector. This projector is intended for use in a cinema environment. General safety precautions Read all safety and warning guidelines before installing or operating the projector.

  • Page 8: Ac/Power Precautions

    • SHOCK HAZARD! A dedicated, protected ground or earth wire must be installed on the product by Christie qualified technicians or electricians before it can be connected to power. • SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning, removing components, or opening any enclosure.
  • Page 9 • F—Represents the side view of the projector. The following table lists the hazard distance for the Christie projector lens with the zoom adjusted to its most hazardous position. For US and international hazard distances based upon IEC 62471-5:2015, Photobiological safety of lamps and lamp systems –...
  • Page 10 — Ultra-high contrast fixed 0.9:1 163-117100-XX — Ultra-high contrast zoom CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 11 — The following gives the hazard distance for the projector lens with the zoom adjusted to its most hazardous position for CP4445-RGB high brightness, high contrast, and ultra-high contrast lenses. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright ©...
  • Page 12 CP4455-RGB high brightness, high contrast, and ultra-high contrast lenses. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 13 "No direct exposure to beam shall be permitted". • The Christie Laser Projection System Installation Checklist must be fully completed after the installation and sent to lasercompliance@christiedigital.com. A copy can remain on-site. This checklist can be found as a separate document in the accessory box with the manual.

  • Page 14: Product Labels

    Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product that is connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.

  • Page 15: Mandatory Action

    Variance Number 2019-V-3343 effective on August 16, 2019. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 16: Contact Your Dealer

    ™ • Christie CineLife+ electronics platform for ultra-fast processing CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 17: List Of Components

    • LiteLOC color lock feature for constant image brightness and color • External chiller unit with exhaust adapter (CP4445-RGB and CP4455-RGB projectors only) List of components Verify all components were received with the projector. • Touch panel, touch panel harness, and panel mounting arm •...
  • Page 18 Ultra-high contrast zoom 1.13-1.66:1 163-103105-XX — 1.31-1.85:1 163-104106--XX — 1.45-2.17:1 163-105107-XX — CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 19 Europe 250V/10A C13 2.5 m 108-604101-XX Australia 250V/10A C13 2.5 m 108-435103-XX CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 20: Cinemaster Cinema Calculator Tool

    Use this tool to help determine the right projector, lens, and lamp based on the unique needs of your installation, as well as your preferred projector type, screen configuration, and brightness requirements. https://cinemaster.christiedigital.com/ Technical support Technical support for Christie Cinema products is available at: • Support.cinema@christiedigital.com • +1-877-334-4267 •...

  • Page 21: Installing And Setting Up

    Installing and setting up Learn how to position and install the projector. Site requirements To safely install and operate CP4445-RGB and CP4455-RGB projectors, the installation location must meet these minimum requirements. Physical operating environment • Ambient temperature (operating) 10 to 35°C (50 to 95°F ) •...

  • Page 22: Power Specifications

    13 A Line frequency 50/60 Hz 50/60 Hz 50/60 Hz CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 23: Projector Components

    Installing and setting up Projector components Learn about the components of the projector. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 24: Chiller Components

    Communication connection for the chiller Adjustable feet—Turn the adjustable feet to increase or decrease the projector height. Chiller components Learn about the components of the chiller, which is used with CP4445-RGB and CP4455-RGB projectors. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev.

  • Page 25: Preparing The Installation Site

    This product must be installed in a landscape orientation, with all four feet supported on a level surface. Do not install or operate the projector in an inverted position. If your site has any installation requirements other than a typical theater projection booth, contact Christie for assistance. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev.
  • Page 26 The following illustrations show the structural frame members of the projector: Lower projector frame Right side projector frame CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 27 Related information Light intensity hazard distance (on page 8) CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 28: Connecting To Power

    • SHOCK HAZARD! A dedicated, protected ground or earth wire must be installed on the product by Christie qualified technicians or electricians before it can be connected to power. • A certified electrician must be present during installation to make sure the installation meets the local electrical code.
  • Page 29 2. On the back right side of the projector, remove the eight screws holding the two AC receptacle knockout plates and then remove the two plates. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 30 4. Taking the approved line cord for your location, strip the cable jacket on the line cord to expose a 120 mm length of the bundled wires. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 31: Connecting To An Uninterruptible Power Supply

    The UPS is connected through the 12V power supply on the projector. The following illustration shows the power supply and connections. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 32 7. Obtain the appropriate line cord for your region, plug the cord into the UPS device, and then plug it into the UPS inlet on the projector. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 33: Installing The Lens

    3. Position the lens so that the UP label is facing upward. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 34 7. Lock the lens assembly in place by rotating the lens clamp downward. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 35: Projector Power Modes

    Installing and setting up Projector power modes The CP4445-RGB and CP4455-RGB projectors track laser operation hours for the laser optical sub- systems (LOS) and the lamp operation hours for xenon lamps. The projector operates with the following power modes: Mode...

  • Page 36: Using The Remote User Interface (Ui)

    • CineLife+ electronics and light engine are on. • LOS is on. • Fans run at full speed. • Chiller is on (CP4445-RGB and CP4455-RGB projectors only). • IMB is on. Using the Remote user interface (UI) Use the remote user interface (UI) to access projector functionality.

  • Page 37: Connecting The Chiller Communication Cable

    The chiller communication cable includes an RS-485 connector, attached cable with rubber grommet, and three terminal connectors. The installation of the chiller communication cable must be performed by a Christie qualified technician. 1. Remove the cover for the signal terminal by unscrewing the two cover screws.

  • Page 38: Connecting The Chiller Power Cable

    The wires of the supplied power cord are connected to the three terminals in the power supply terminal. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 39 3. Connect the L, N, and PE harness connectors to the corresponding terminals. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 40 To avoid pinching the power cable, make sure the cable and rubber grommet are placed inside the cover cutout. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 41: Connecting The Coolant Lines

    6. Re-attach the terminal block cover using the two cover screws. 7. Plug the power cable into an appropriately rated AC power outlet. Connecting the coolant lines The required coolant lines and hose accessories are available in the Christie Chiller Setup Kit Plumbing (P/N: 163-149105-XX). •...
  • Page 42 Attach the Chiller Inlet quick connector (female) to the projector outlet port (male). CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 43: Installing The Chiller Duct

    1. Attach the duct over the exhaust fan on the top of the chiller unit. The duct is available in the Christie Chiller Setup Kit Air Ducts (P/N: 163-150107-XX). For detailed information on connecting the chiller duct, refer to the Christie Chiller Setup Kit Instruction Sheet P/N: 020-103145-XX.

  • Page 44: Maintaining The Chiller

    6. Make sure the chiller communication cable between the projector and the chiller is connected correctly. To avoid thermal shutdown conditions in dual projector installations, Christie recommends running each chiller and its attached projector separately, with light on, to confirm chiller communication cables are not cross-connected relative to the coolant lines.

  • Page 45: System Operation For Cp4445-Rgb And Cp4455-Rgb Projectors

    Dispose of coolant in accordance with local regulations. System operation for CP4445-RGB and CP4455- RGB projectors Understand the correct sequence for powering up and operating CP4445-RGB and CP4455-RGB systems. The connected chiller must always be turned on first and turned off only after the projector is turned off.

  • Page 46: Turning On Or Off The Light Source

    4. Verify the marriage ring is installed correctly and an anti-tamper alarm does not appear on the touch panel. Disposing of the product packaging Once the product has been installed and set up, Christie recommends reusing or recycling the product packaging according to your local regulations. Completing the installation checklist Complete the provided installation checklist (P/N: 020-103137-XX) and return it to Christie.

  • Page 47: Video Input Panel

    Not used. (SDVoE) port USB-C port Connects the projector touch panel. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 48: Hdmi Video Source

    Fractional 1/1.001 frame rates, 1920 x 1080 (HD), and 3840 x 2160 (UHD) formats are also supported. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 49 24, 25, 30, 50, 60 Y'C' /RGB/ 8/10/12 bpc Frame-packing 4:4:4 /4:2:2 CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 50: Sdi Video Source

    Single-link 2D image formats The following single-link 2D SDI image formats are supported. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 51 /RGB component at 12.0 Gb/s (ST 2082-10) mode 1 structure CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 52 24, 25, 30, 50, Y'C' /4:4:4(4) 10 bpc HD 720p Y'C' /RGB CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 53 Y'C' component at 12.0 Gb/s (ST 2082-10) mode 2 structure CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 54 24, 25, 30 Y'C' /RGB/ 10 bpc 2160p 4:4:4:(4) Y'C' /RGB CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 55 Y'C' /4:2:2 12 bpc Y'C' component at dual-link 3 Gb/s CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 56 Input 1 = SDI 1 and SDI 2 • Input 2 = SDI 3 and SDI 4 CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 57 4:4:4:(4) component at dual-link 6 Gb/s (ST 2081-11) mode 1 CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 58 3 Gb/s (ST 425-5) structure 4 level CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 59 12 Gb/s (ST 2082-12) mode 2 structure CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 60 Y'C' /4:2:2 12 bpc Y'C' component at quad-link 3 Gb/s CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 61 4:4:4 component at 12.0 Gb/s (ST 2082-10) mode 2 structure CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 62 96, 100, 120 Y'C' /4:2:2 10 bpc HD 1080p Y'C' CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 63: Displayport Video Source

    The following image formats are supported by the DisplayPort inputs. Frame rates also include fractional 1/1.001 frame rates. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 64 The following single-link DisplayPort PC image formats are supported. Format Cables Frame rate Sampling Bit-depth (Hz) 1280x800 8bpc CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 65: Integrated Media Block (Imb) Video Source

    Enables connection of MPEG-2 video formats. Enables connection of MPEG-2 MXF interop video formats. Enables connection of SMPTE-compatible 2D and 3D video formats Contact Christie Technical Support to learn which S2 and S4 IMB devices are compatible with Christie projectors. Series 2 IMB video formats S2 IMB video format support is determined by the IMB make and model.
  • Page 66 X’Y’Z’ (4:4:4) 12-bits SMPTE 428-11-2013 2048x1080 50.0 X’Y’Z’ (4:4:4) 12-bits CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 67 48.0 x 2 Am1:2016 SMPTE 2048-1-2011 50.0 x 2 Am1:2016 CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 68: Series 4 Imb Video Formats

    8-bits 625 SD 800 x 600 120.0 120.0 23.0 8-bits CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 69 12-bits 2048 x 1080 48.0 x 2 X’Y’Z’ (4:4:4) 12-bits CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 70: Hdmi Video Source Connection From An Imb

    The projector can accept digital video data from HDMI sources connected to applicable IMB devices. The input configurations supported are determined by the IMB device directly. Contact Christie Technical Support to learn which IMB devices provide HDMI source selection from the projector user interface.
  • Page 71 GP13_POS Pin 18 GPI3_NEG Pin 19 — Pin 20 — CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 72: Managing The Light Source

    13. Adjust the brightness level until you achieve the required brightness at the specified white point. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 73: Modifying An Existing Laser File

    5. Enter a new name for the laser file and then select Save. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 74: Deleting A Laser File

    Re-doing this calibration is required if the following is replaced: • Color sensor board Christie recommends re-doing this calibration if any of the following are replaced: • Light engine •...

  • Page 75: Creating A New Calibration File

    When the countdown ends, take x, y, and fL measurements using the spectroradiometer. Christie recommends taking meter readings from the center of the screen to obtain accurate screen measurements. c) Under Measured Values, using the numeric keypad record the associated spectroradiometer values for x, y, and fL.

  • Page 76: Recalibrating An Existing Calibration File

    Capture button is active at a time but the buttons can be selected in any order. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 77: Editing The Existing Calibration File Parameters

    Verifying the sensor-to-screen calibration Check the integrity of the calibration, if required. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 78: Adding A Calibration File To The Channel Setup

    Calibration File list, select the calibration file. 4. Select Save. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 79: Adjusting The Image

    Learn how to adjust image geometry so it displays correctly. Calibrating the Intelligent Lens System On CP4445-RGB and CP4455-RGB projectors, the Intelligent Lens System (ILS) is activated by default. Use the Auto Calibrate feature of the ILS to find and compensate for motor backlash, and to determine the movement range for the currently installed lens.

  • Page 80: Correcting Keystone Effect

    2. If the keystone effect is severe, unevenly adjust the feet to compensate for projector tilt. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 81: Displaying A Test Pattern

    Adjusting the image Christie recommends using the lens offset to align the center of the image to the center of the screen before correcting the keystone effect. 3. If one side of the image is longer than another, adjust the tilt and level of the projector.
  • Page 82 6. Loosen the lock screw for the Zoom and Focus paddles. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 83 To make vertical adjustments on the fold mirror, use the purple adjustment knob. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 84: Adjusting Boresight

    Caution! If not avoided, the following could result in minor or moderate injury. • This procedure must be performed by Christie qualified technicians. When making the adjustments, set the light source to minimum power. To following steps are intended to achieve the highest quality image distributed across the full screen.
  • Page 85 5. Select the RGB-4K-Boresight pattern and display it full screen. Make sure the Uncorrected Color Box option is selected. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 86 2) and turn them until they just touch the base. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 87: Mechanically Adjusting Dmd Convergence

    4. Select the RGB-4K-Convergence test pattern and display it full screen. Make sure the Uncorrected Color Box option is selected. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 88 7. Use the Convergence test pattern to assist with adjusting the horizontal and vertical lines. CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 89 For the best stability, Christie recommends setting convergence while rotating the knobs in a clockwise direction. This may require first adjusting convergence by turning the knobs counter- clockwise and finalizing the convergence with a clockwise approach.

  • Page 90: Regulatory

    IEC 61000-3-2/EN61000-3-2: Limits for harmonic current emissions for equipment with input current ≤ 16 A CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 91: Immunity

    Regulation (EC) No. 1907/2006 on the registration, evaluation, authorization and restriction of chemicals (REACH) and the applicable official amendment(s). CP4445-RGB and CP4455-RGB Installation and Setup Guide 020-103746-01 Rev. 1 (11-2022) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

This manual is also suitable for:

Cp4455-rgb

Table of Contents