Green Formatter Fan (#4) - Christie CineLife+ CP4415-RGB Service Manual

6. Remove the four screws securing the fan to the bracket.
7. Replace the fan, if required.
8. To re-install, follow these steps in reverse order.

Green formatter fan (#4)

The green formatter fan provides cooling for the green light engine formatter board.
1. Remove the top cover (on page 44).
2. To remove the light engine security cover, loosen the screw.
3. Disconnect the fan #4 harness inline connector.
4. To remove the fan, loosen the two screws.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
56