Front Cover; Side-Intake Cover - Christie CineLife+ CP4415-RGB Service Manual

Front cover

The front cover provides access to the lens assembly. On the CP4435-RGB, the front cover also
provides access to the coolant reservoir.
1. Loosen the four screws securing the front cover.
CP4415-RGB/CP4420-RGB shown below.
2. Remove the front cover.
3. Replace the front cover, if required.
4. To re-install, follow these steps in reverse order.
Verify the lens boot is properly aligned and sealed against the front cover.

Side-intake cover

The side-intake cover provides access to the radiator, filter, and fans.
1. Loosen the four screws securing the side-intake cover.
2. Remove the side-intake cover.
CP4415-RGB/CP4420-RGB shown below.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Projector covers and feet
47