Ac Line Filter (10 Amp); Power Supplies For Cp4415-Rgb And Cp4420-Rgb - Christie CineLife+ CP4415-RGB Service Manual

7. Replace the AC line filter.
8. To re-install, follow these steps in reverse order.

AC line filter (10 amp)

Learn how to replace the 10 amp AC line filter.
1. Remove the rear cover (on page 45).
2. Remove six screws securing the AC line filter cover.
3. Remove two screws from the line filter.
4. Disconnect the three connectors.
5. Replace the AC line filter.
6. To re-install, follow these steps in reverse order.
Power supplies for CP4415-RGB and CP4420-
RGB
The CineLife+ 4K-RGB power supply assembly includes individual 12V and 54 power supply modules
secured within a support bracket.
Only applies to: CP4415-RGB and CP4420-RGB
The 12V power supply module provides the required voltages for operating the electronics in the
projector and for receiving a UPS connection (if installed).
The 54V power supply module provides the required voltages for the lasers and pumps.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Electronics
82