Summary of Contents for Christie CineLife+ CP4415-RGB
Page 1
User Guide 020-103073-03 CineLife+ CP4415-RGB, CP4420-RGB, CP4440-RGB, CP4450-...
Page 2
Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose.
Safety precautions Learn about the safety precautions related to the Christie CineLife+ projector. This projector is intended for use in a cinema environment. General safety precautions Read all safety and warning guidelines before installing or operating the projector. Warning! If not avoided, the following could result in death or serious injury.
Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product that is connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.
For complete production documentation and technical support, go to www.christiedigital.com. Product documentation For installation, setup, and user information, see the product documentation available on the Christie Digital Systems USA Inc. website. Read all instructions before using or servicing this product.
4. If the projector has a GDC IMB SR-1000 installed and configured, you can access the GDC IMB Web UI by using the Media Block tab. Technical support Technical support for Christie Cinema products is available at: • Support.cinema@christiedigital.com •...
For Red, Green, and Blue power levels, system stability may be affected if levels are set below the minimum (MIN) power limit shown. To ensure color and brightness are held at the required levels for your installation, Christie recommends enabling LiteLOC for each laser file you create.
For Red, Green, and Blue power levels, system stability may be affected if levels are set below the minimum (MIN) power limit shown. To ensure color and brightness are held at the required levels for your installation, Christie recommends that you enable LiteLOC for each laser file you create.
Managing the light source When setting the Red or Green power level, Christie recommends setting a level below the maximum (MAX) limit shown. A value below the maximum limit ensures an optimal brightness that can be maintained over time. 8. If color or brightness is not at the target level, refine the Red, Green, and Blue power settings to achieve the target, and then allow the projector to re-stabilize for an additional 3 to 5 minutes.
6. Ensure Test Patterns > Uncorrected Colors is selected. 7. Setup a spectroradiometer, such as the CR-250, on a tripod. Place the meter perpendicular to the screen to achieve accurate measurements. Christie recommends using a CR-250 or better. 8. Log in as the service user.
A user account is a set of credentials consisting of both a user name and password that allows access to projector settings. Default user access permissions This table lists the Christie touch panel access permissions. Permission Description...
Warp files are created using an automated process through Christie Mystique. For more information on using Christie Mystique in a cinema environment, see the Mystique User Guide—Cinema Edition (P/N: 020-001240-XX). 1. Using Christie Mystique, create the required warp file.
Adjusting the image Adjust the projector image. Christie recommends warming the lens before completing these procedures as focus may change as the lens warms. Correcting vignetting An image that is brighter at the center than it is at the sides needs vignetting correction.
Extreme misalignment of projection optics can cause permanent damage to critical optical components. Only Christie qualified technicians can perform internal optical adjustments. The integrator rod and fold mirror adjustments are set by Christie. Make adjustments only if screen shadows are visible.
Caution! If not avoided, the following could result in minor or moderate injury. • This procedure must be performed by Christie qualified technicians. When making the adjustments, set the light source to minimum power. To following steps are intended to achieve the highest quality image distributed across the full screen.
For the best stability, Christie recommends setting convergence while rotating the knobs in a clockwise direction. This may require first adjusting convergence by turning the knobs counter- clockwise, and finalizing the convergence with a clockwise approach.
You can also create a custom macro that uses the fire alarm trigger or edit the default fire alarm macro to perform other actions as needed. Christie ACT actions These are the available built-in commands for the Christie ACT: Command Description...
An upgrade package is used to upgrade the projector software to the latest version. The upgrade package is installed from a USB key or from the projector's ftpuser directory. To obtain the upgrade package, contact Christie Technical support. 1. Power on the projector and place it in Standby mode.
Page 81
Corporate offi ces Worldwide offi ces Christie Digital Systems USA, Inc. Africa Columbia Mexico United States (Arizona) ph: 714 236 8610 ph: +27 (0)11 510 0094 ph: +57 (318) 447 3179 ph: +52 55 4744 1790 ph: 602 943 5700...