6. Remove the plastic cover.
7. Remove the three screws securing the zoom and focus assembly.
8. Remove and replace the zoom and focus assembly.
9. To re-install, follow these steps in reverse order.
10. After replacing the integrator assembly, perform the following tasks as described in the
CineLife+ User Guide (P/N: 020-103073-XX).
•
Perform an LOS coupling mirror alignment (on page 19).
•
Perform a LiteLOC
Fold mirror adjustment assembly
The fold mirror directs light towards the light engine.
1. Remove the top cover (on page 44).
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
™
calibration (on page 27).
Optics
97