5. Replace the fan, if required.
6. To re-install, follow these steps in reverse order.
Red formatter fan (#5)
The red formatter fan provides cooling for the red light engine formatter board.
1. Remove the top cover (on page 44).
2. If the light engine coolant hoses are in the way, disconnect them.
3. To remove the light engine security cover, loosen the screw.
4. Disconnect the fan #5 harness inline connector.
5. To remove the fan with the bracket, loosen the three screws.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
57