Christie CineLife+ CP4415-RGB Service Manual page 21

When adjusting the fold mirror, set the light source to minimum power.
1. In the right toolbar, select Test Patterns.
2. Set the Red/Green/Blue power to less than 40%.
High power and misalignment can damage the DMDs.
3. Select the RGB-4K-Integrator Rod test pattern and display it full screen.
Refer to the test pattern for guidance on making the adjustments. The right panel of the test
pattern provides information about the integrator zoom and focus adjustments. The left panel
provides information about the fold mirror adjustments.
4. Open the Service door on the side of the projector.
5. To use the integrator rod optical controls, open the access door for the Zoom and Focus
paddles.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Service setups
21