6. Remove the two screws securing the fan to the bracket.
7. Replace the fan, if required.
8. To re-install, follow these steps in reverse order.
Radiator intake fans (#12-19 for CP4415-RGB and
CP4420-RGB)
The radiator intake fans draw cool air in to assist in cooling the projector.
1. Remove the radiator (on page 68).
2. Disconnect the fan harness connector.
3. For the affected fan, remove the grill.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
58