Cave Fan (#102) - Christie CineLife+ CP4415-RGB Service Manual

3. Disconnect the fan harness connector (#101).
4. Remove four screws securing the fan.
5. Remove and replace the fan.
6. To re-install, follow these steps in reverse order.

CAVE fan (#102)

The CAVE fan cools the CAVE module, which provides the master control, video input, and video
processing.
1. Remove the top cover (on page 44).
2. Remove the electronics-side cover (on page 46).
3. Loosen the screw securing the light engine cover and remove it.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
64