Light Engine Intake Fans (#25-30 For Cp4415-Rgb And Cp4420-Rgb; #6-11 For Cp4425-Rgb And Cp4435-Rgb) - Christie CineLife+ CP4415-RGB Service Manual

5. Swing the fan pack out to remove it from the radiator assembly.
6. For the affected fan, remove the grill.
7. Remove the four screws securing the fan.
8. Replace the fan.
9. To replace additional fans, repeat steps 6 to 8.
10. To re-install, follow these steps in reverse order.
Light engine intake fans (#25-30 for CP4415-RGB
and CP4420-RGB; #6-11 for CP4425-RGB and
CP4435-RGB)
The light engine intake fans draw air into the projector to cool the light engine.
These instructions detail accessing the air filter from the top of the projector. The filter can also be
removed from the side of the projector. Contact Christie Technical Support for more details.
1. Remove the top cover (on page 44).
2. To remove the light engine security cover, loosen the screw and lift the plate from over the fan
pack.
3. To remove the light engine intake fan cover, loosen the two screws and remove the plate over
the fan pack.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
61