4. Replace the top cover, if required.
5. To re-install, follow these steps in reverse order.
Rear cover
Removing the rear cover provides access to the power supplies and other components allowing
removal of the integrator assembly.
1. Loosen the six screws securing the rear cover.
2. Remove the rear cover.
CP4415-RGB/CP4420-RGB shown
3. Replace the rear cover, if required.
4. Before re-installing the rear cover of a CP4435-RGB projector, ensure the handles are in place.
The handles are held at the bottom of the projector by magnets and at the top by screws.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Projector covers and feet
45