Card Cage Intake Fan (#103); Laser Driver Card Cage Exhaust Fan For Cp4425-Rgb And Cp4435-Rgb - Christie CineLife+ CP4415-RGB Service Manual

Card cage intake fan (#103)

The card cage intake fan draws in air to assist with cooling.
1. Remove the card cage (on page 78).
2. Disconnect the fan harness connector (#103).
3. Remove the four fan-guard rivets.
4. Remove the four screws securing the fan.
5. Remove and replace the fan.
6. To re-install, follow these steps in reverse order.
Laser driver card cage exhaust fan for CP4425-
RGB and CP4435-RGB
The laser driver card cage fan draws the hot air out of the card cage.
Only applies to: CP4425-RGB and CP4435-RGB
1. Remove the laser driver card cage (on page 88).
2. Disconnect the laser driver card cage exhaust fan harness connector.
3. Remove the four fan guard rivets.
4. Remove the four screws securing the fan to the laser driver card cage housing.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
67