Coolant Pump Module For Cp4415-Rgb And Cp4420-Rgb - Christie CineLife+ CP4415-RGB Service Manual

7. Disconnect the hoses from the radiator.
8. Release the hoses from all clips.
9. Remove and replace the coolant hoses.
10. To re-install, follow these steps in reverse order.
Coolant pump module for CP4415-RGB and
CP4420-RGB
Learn how to remove the coolant pump module from CP4415-RGB and CP4420-RGB projectors.
1. Remove the side-intake cover (on page 47).
2. Release the pump module coolant connectors quick disconnects.
3. Disconnect the power-harness connector.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
74