3. Replace the mirror assembly.
4. To re-install, follow these steps in reverse order.
5. After re-installing the assembly, perform optical adjustments (on page 32) and the steps in
LiteLOC sensor-to-screen calibration (on page 27).
Laser optical subsystem (LOS) for the CP4415-
RGB and CP4420-RGB
Learn how to remove the LOS.
1. Extend the feet of the unit so that you have at least 15 cm (6 inches) of clearance.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Optics
102