2. Lift the air filter out of the projector.
3. Replace the used air filter with a new one.
The airflow indicator on the new filter must point towards the fan assembly.
4. Close the air filter door on the top of the unit.
Replacing the main intake air filter
The main intake air filter is located behind the side-intake cover.
1. Remove the side-intake cover (on page 47).
2. Pull out the air filter from the projector.
3. Replace the used air filter with a new one. Feed the air filter behind the tabs.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Maintenance and cleaning
36