Printed Circuit Boards And Sensors; Cs18G6 Board For Cp4415-Rgb And Cp4420-Rgb - Christie CineLife+ CP4415-RGB Service Manual

Printed circuit boards
and sensors
Printed circuit boards (PCB) mechanically support and electrically connect the projector components.
Sensors convert information such as temperature, light, and communication into electrical signals.
Always wear an electrostatic discharge (ESD) strap and use insulated tools when replacing circuit
boards.
CS18G6 board for CP4415-RGB and CP4420-
RGB
The CS18G6 board is also known as the laser driver board. The CS18G6 laser driver service kit
includes a laser driver cage.
1. Remove the rear cover (on page 45).
2. Remove the radiator (on page 68).
3. Disconnect the seven harnesses: P128, P164, J111, J113, J170, J171, and J172.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
109