IT
3 - Pulsante accensione
radiocomando e segnalatore
acutico
Premere il pulsante per accendere
il radiocomando, successivamente
funziona da segnalatore acustico.
(Vedi immagine 43b)
4 - Avviamento motore e conferma
del tipo di accessorio a display
- Prima dell'accensione, occorre
far risalire il pulsante di ARRESTO
D'URGENZA "2.1".
- Premere la leva "4" per accendere il
motore.
- Tirare la leva "4" per confermare il
tipo di accessorio a display.
(Vedi immagine 43b)
5 - Pulsante elettropompa d
emergenza per il salvataggio
cestello
Vedere ISTRUZIONI PER IL
SALVATAGGIO.
(Vedi immagine 43b)
6 - Presa per fi locomando
Consenso manovre dal cestello
(Vedi immagine 43c)
7 - Schede movimenti accessori gru
Cambiare scheda movimenti in base al
accessorio installato.
(Vedi immagine 43c)
7
3 – Radio control switching on
button and Warning sound
Press the button to switch on the
radio control, it then works as the
warning sound.
(See image 43b)
4 - Engine start-up and confirm of
the attachment type shown on the
display
- Before switching on, lift the
EMERGENCY STOP button "2.1".
- Press lever "4" to switch on the
engine.
- Pull lever "4" to confirm the
attachment type shown on the
display.
(See image 43b)
5 – Emergency motor pump button
for basket rescue
See INSTRUCTIONS FOR RESCUE.
(See image 43b)
6 - Socket for control wire
Consent for movements from basket
(See image 43c)
7 - Crane attachment movements
charts
Change the movements chart
according to the attachment installed.
(See image 43c)
43c
EN
2-12
NL
3 - Inschakelingsknop
radiobesturing en geluidssignaal
Druk op de knop om de
radiobesturing in te schakelen, daarna
werkt hij als geluidssignaal.
(Zie afbeelding 43b)
4 - Motor starten en bevestiging van
het type werktuig op het display
- Voordat u de motor start, dient u de
NOODSTOP-knop omhoog te zetten
"2.1".
- Trek de hendel "4" omhoog om
motor op te starten.
- Trek aan de hendel "4" om het type
toebehoren te bevestigen op het
display.
(Zie afbeelding 43b)
5 - Knop elektrische noodpomp
voor de reddingsprocedure van de
kooi
Zie de REDDINGSINSTRUCTIES.
(Zie afbeelding 43b)
6 - Contact voor draadbediening
Toestemming manoeuvres kooi
(Zie afbeelding 43c)
7 - Kaarten bewegingen
kraanwerktuigen
Verwissel de bewegingskaart
naargelang het gemonteerde
werktuig.
(Zie afbeelding 43c)
43d
6
Need help?
Do you have a question about the MRT EASY 55P 400 ST4 S2 and is the answer not in the manual?