Maintenance
5. To exit the menu, touch X.
6. To return to the Home screen, press the Home button.
Performing a Transfer Belt Cleaning Mode Procedure
Debris on the transfer belt can cause vertical black or color-streaks and lines to appear
on prints. To remove black or color-streaks and lines on prints, use the Belt Cleaning
Mode procedure.
To perform a Belt Cleaning Mode procedure:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Belt Cleaning Mode.
3. To perform a Belt Cleaning Mode procedure, touch Start.
4. At the successfully completed prompt, touch Close.
5. To exit the menu, touch X.
6. To return to the Home screen, press the Home button.
Supplies
Consumables
Consumables are printer supplies that are depleted during the operation of the printer.
Consumable supplies for this printer are the Genuine Xerox
magenta, yellow, and black.
Note
• Each consumable includes installation instructions.
• Install only new cartridges in your printer. If a used toner cartridge is installed, then
the toner-remaining amount displayed could be inaccurate.
• To ensure print quality, the toner cartridge was designed to cease functioning at a
predetermined point.
Caution
Use of toner other than genuine Xerox
reliability. Xerox
®
Toner is the only toner designed and manufactured under strict quality
controls by Xerox for specific use with this printer.
Routine Maintenance Items
Routine maintenance items are printer parts that have a limited life and require periodic
replacement. Replacements can be parts or kits. Routine maintenance items are typically
customer replaceable parts.
Note
Each routine maintenance item includes installation instructions.
Routine maintenance items for this printer include the following:
• Drum Cartridge Kit
7-12
®
Toner Cartridges in cyan,
®
Toner can affect print quality and printer
®
Xerox
®
VersaLink
C600 Color Printer
User Guide