Stacker Is Full, Unload Paper - Xerox Phaser 4500 Service Manual

Stacker Is Full, Unload Paper

Error Indication
Stacker Is Full, Unload Paper
Troubleshooting Reference
Applicable Parts
Stack Full Sensor (0n Stacker
PWBA)
HVPS/Engine Logic Board
Stacker PWBA
Stack Full Actuator
Troubleshooting Procedure
Steps Actions and Questions
1
Manually operate the Stack Full Actuator at
the paper outlet.
Does the Stack Full Actuator move
smoothly?
2
Enter Service Diagnostics, and from the
Sensor Tests
Full Sensor
Is the position of the sensor actuator
correctly reported when it is manually
actuated?
Error Messages and Codes
Wiring and Plug/Jack Map References
"Stacker Signal Diagram" on page 10-32
"Stacker General Wiring Diagram" on page 10-31
"Stacker Plug/Jack Locator" on page 10-14
menu select the Stacker
test.
Yes
Go to step 2.
Replace the
HVPS/Engine
Logic Board
(page 8-89).
No
Replace the
Stack Full
Actuator
(page 8-139).
Go to "Stacker
PWBA" on
page 4-59.
3-67