Table of Contents
Advertisement
Starting up the device - Configuration
Input data
Tab. 8.26:
Input data for module 40
Input data
Code type
(symbology)
Input data length
1 byte
Output data
None
8.9
Data Processing
8.9.1
Module 50 – Characteristics filter
PROFINET-IO module identifier
Module ID: 1050
Submodule ID: 1
Description
Configuration of the characteristics filter.
This filter can be used to set how bar codes with identical content are handled and what criteria are to be
taken into account in determining the likeness.
Parameter
Tab. 8.27:
Parameters for module 50
Parameter
Handling of
identical bar
code informa-
tion
Comparison pa-
rameter code
type
Leuze electronic GmbH + Co. KG
Description
Code type of the transmit-
ted bar code
Description
Determines how bar codes with
the same content are to be man-
aged.
If this criterion has been activated,
the bar code type is used to deter-
mine whether the bar codes are
identical.
Addr. Data type
0
UNSIGNED8 0: No code
Addr. Data type
0
UNSIGNED8 0: All bar codes
1.0
Bit
BCL 248i
Value range
1: 2/5 Interleaved
2: Code39
6: UPC, UPCE
7: EAN8, EAN13
8: Code128, EAN128
10: EAN Addendum
11: Codabar
12: Code93
13: GS1 DataBar Omni-
directional
14: GS1 DataBar Limited
15: GS1 DataBar Ex-
panded
Value range
are stored and
output.
1: Only non-iden-
tical bar code
contents are out-
put.
0: Deactivated
1: Activated
Initial
value
0
Default
1
1
75
Advertisement
Table of Contents
