Table of Contents
Advertisement
Starting up the device - Configuration
Parameter
Tab. 8.13:
Parameters for module 14
Parameter
Separator char-
acter
Parameter length
1 byte
Input data
None
Output data
None
NOTICE
An interlinked read result also requires module 12 – Multi-label. In this mode, the additional in-
formation transmitted in modules 31ff relates to the last decoding result in the chain.
8.8
Result format
In the following, various modules for the output of decoding results are listed. They have the same structure
but different output lengths. The PROFINET-IO module concept does not cater for modules of variable data
length.
NOTICE
Modules 20 ... 27 are to be regarded as alternatives and should not be used in parallel.
Modules 30 ... 41 can be combined freely with the decoding result modules.
8.8.1
Module 20 – Decoder state
PROFINET-IO module identifier
Module ID: 1020
Submodule ID: 1
Description
The module indicates the state of the decoding and of the automatic decoder configuration.
Parameter
None
Input data
Tab. 8.14:
Input data for module 20
Input data
Reading gate
state
Leuze electronic GmbH + Co. KG
Description
This parameter is used to define a
delimiter that is inserted between
two individual decoding results.
Description
The signal indicates the current state of
the reading gate.
Attention: This does not necessarily cor-
respond to the state at the time the bar
code is scanned.
Addr.
Data type
0
UNSIGNED8
Addr.
0.0
BCL 248i
Value range
1 ... 255
0: No delimiter
is used.
Data
Value range
type
Bit
0: Off
1: On
Default
';'
Initial
value
0
65
Advertisement
Table of Contents
